How to Jump a Car

One of the most frustrating events any car owner can experience is to return to their car after an outing only to be greeted by a dead battery. No matter the circumstance, a dead battery can be a huge hassle, particularly during the colder months of the year. Fortunately, with a quick jump, you should be able to get your car started and back on the road in no time at all.

However, if you’ve never had to jump your car before, you may be unfamiliar what the process entails or how to do it properly. Learn how to jump a car so that you’re never stranded, and learn where you can get expert maintenance in Freehold, Marlboro, or Englishtown.

Make Sure You Have the Right Equipment

The only positive aspect about having to jump start your car is that you only need two things to get the job done: another vehicle with a fully charged battery and a set of jumper cables.

When learning how to jump a car, many people wonder if there is a certain type of jumper cable that they need. While virtually any brand of jumper cable will do the job, you do need to make sure to get the right length. If a jumper cable is too short, you won’t be able to reach the other car’s battery, preventing a successful jump start. Standard jumper cables should be somewhere between ten and twenty feet, which should provide you all the length that you need.

Stay as Safe as Possible

Now that you know more about the tools you’ll need for the job, it’s time for a word about safety. Since jumping a car involves high amounts of electricity, it’s important that you stay as safe as possible. A dead car battery is much better than a serious injury after all.

First, make sure your car is clear of vulnerable people, like small children. Secondly, once your jumper cables are attached to one battery, do not touch the remaining metal clamps to anything other than your car’s battery. Finally, if you possess them, make sure to wear safety goggles to protect your eyes from the possibility of sparks.

Jump Starting a Car

With the basics in mind, you are now ready to jump your car. First, position the working car in front of your car about eighteen inches apart, hood to hood. Make sure both cars are off, the keys are removed and the hoods are popped.

Take your jumper cable and attach the red positive clamp to the positive terminal of your dead battery. Next, attach the other end of the positive clamp to the working battery. With that done, attach the black negative clamp to the working battery’s negative terminal. Finally, connect the other end of the negative clamp to an unpainted nut on your car’s engine to ground the connection.

Once the connection has been made, first start the working vehicle and then try to crank your car. If it does not crank on the first try, give your battery a moment to charge and then try again. If your car does start, disconnect the jumper cable—black first and then red. Close the hood of your vehicle, and then drive around for a brief period so your battery can fully charge.

Get Car Maintenance when a Jump Start Fails

Even if you know how to jump a car in Englishtown, Marlboro, or Freehold, sometimes the process can fail, which means you need car maintenance from Freehold Subaru. The Freehold Subaru Service and Parts department can recharge or replace your battery and get you back on the road. Visit us today for your maintenance needs. Have a question? Contact us today!


Categories: Community Events


Nothing posted yet.
Post a Comment
/* written by ddcjamesc css for this is at: /Users/ddcjamesc/git/cms-sites/htdocs/sites/s/subaruprofile/stylesheets/0001.css /Users/ddcjamesc/git/cms-sites/htdocs/sites/s/subaruprofile/stylesheets/0002.css */
true true true true true true true true true true true true